MAEDLER MÄDLER® - Mechanical on line calculator (calculation tools) - Strojarstvo on line proračun

MAEDLER  MÄDLER® - Mechanical on line calculator (calculation tools) - Strojarstvo on line proračun

https://www.maedler.de/Static/Tools

1. Hardness conversion
2. Fit calculation
3. Rough calculation for bolted joints
4. Rough calculation for shafts
5. CAD download - preuzimanje MÄDLER® CAD-Library > Download (3,4 GB)

Flow and CV calculator + ppm to mg3 converter

Flow and CV calculator  +  ppm to mg3 converter

https://teesing.com/en/tools

Purifier configurator
Configure the correct purifier for your application on this page by selecting the maximum flow rate, maximum inlet pressure, inlet gas and impurities to be removed.

Flow and CV calculator
For calculating the flow or Cv to establish the relationship between the pressure drop and the flow.

PPM MG3 converter
Gas concentration converter: PPM to mg/m3
For easy conversion from ppm to mg / m3 for various gases.

Time Duration Calculator - between two times or two dates

Time Duration Calculator - between two times or two dates

Time Duration Calculator Between Two Times

https://www.calculator.net/time-duration-calculator.html 

Use the calculator below to find the hours, minutes, and seconds between two times.

Time Between Two Dates

https://www.calculator.net/time-duration-calculator.html
Use this time and date duration calculator to find out the number of days, hours, minutes, and seconds between the times on two different dates.

Time Calculator

https://www.calculator.net/time-calculator.html
This calculator can be used to "add" or "subtract" two time values.

Online Calculator by OMNI TOOLS

Online Calculator by OMNI TOOLS

https://omni-tools.com/

The ultimate tool library:

1-Agriculture
Crop Yield
Drying Weight Loss
Solution Concentration (ppm)

2-Construction
Concrete Mix
Footings Volume Calculator
Water Weight

3-Financial
Compound Interest
Delivery Tip
Stock Calculator

4-Health
Blood Compatibility
Blood Type
Blood Type Diseases
Blood Type Frequencies
Blood Type Diet
Heart Rate Zones
Personality By Blood Type
Rh Factor

5-Math
Greatest Common Factor
Least Common Multiple

6-Mechanical Engineering
Bilateral Cp / Cpk
Metric Threads
Unilateral Cp / Cpk
Tolerance Calculator

7-Statistics
Confidence Interval
Standard Deviation
Standard Error

8-Text Transformation
Case Converter
Roman Numerals Converter

9-Woodworking
Lumber Volume
Round Log Volume
Plywood Area

Fit Tolerance ISO calculator for shaft and hole by OMNI TOOLS

 Fit Tolerance ISO calculator for shaft and hole by OMNI TOOLS

https://omni-tools.com/tools/mechanical-engineering/tolerance-calculator

Fit Tolerance ISO calculator for shaft and hole BY PFERD

Fit Tolerance ISO calculator for shaft and hole by PFERD

https://www.pferd.com/us-en/service/fits-and-tolerances-calculator/

"...Calculate fits and tolerances for shafts and holes here. Based on standard tolerances and limit deviations in accordance with ISO 286...."

Fit Tolerance ISO calculator for shaft and hole BY FACTUREE

Fit Tolerance ISO calculator for shaft and hole by FACTUREE

https://www.facturee.de/en/online-tools/fit-calculator/#passungsrechner

"... Our online fit calculator not only calculates the maximum tolerated dimensions for a given nominal dimension and type of fit but, as the first fit calculator, also does the reverse. This can be helpful on drawings when, in addition to the nominal dimension, the tolerance variations alone are indicated. If the inner and outer fit are specified, the fitting type is additionally output and visualized.

The corresponding fundamental tolerances and limit values are thereby established in ISO 286-1:2010 und ISO 286-2:2010.

Fits always consist of three pieces of information:

-Nominal dimension: Nominal dimension for the diameter of the hole or the outer diameter of a shaft.

-Degree of tolerance: marked with numbers from 01-18. The smaller the number, the smaller the tolerance field.

-Tolerance position: Designated with the letters A - ZC. Describes the position of the tolerance field. The farther a letter is from A, the tighter the fit.

The following types of fits thus arise:

-Clearance fit (maximum shaft dimension is always smaller than the minimum dimension of the hole)

-Interference fit / press fit (minimum dimension of the shaft is always greater than the maximum dimension of the hole)

-Transition fit (depending on the attained nominal dimensions, either clearance fit or interference fit)..."

Flat Spiral Coil (can be used for length calculation of flat spiral coil)

Flat Spiral Coil (can be used for length calculation of flat spiral coil)

https://deepfriedneon.com/tesla_f_calcspiral.html

Length of Helical Coil - Spiral (can be used for length calculation of helical coil - spiral screw conveyor )

Length of Helical Coil - Spiral

(can be used for length calculation of helical coil -  spiral screw conveyor )

https://deepfriedneon.com/tesla_f_calchelix.html

Open Channel Flow Calculator

This open channel flow calculator will help you find water flow velocity and volumetric flow rate through an open channel, given the channel's roughness coefficient, slope, and cross-sectional area.

In this calculator, you will learn how Manning's equation works and how to use it to determine water flow. You will also learn about the most efficient cross-sections of open channels. Keep reading to start learning.

https://www.omnicalculator.com/physics/open-channel-flow

This simple program calculates the flow of water in a rectangular or trapezoidal channel using Manning's Formula. The formula is only applicable to channels that have a relatively uniform profile and slope.

http://clem.sturmfels.com.au/channel-flow/

Cylindrical Wedge - Geometry Online Calculator

Cylindrical Wedge - Geometry Online Calculator
https://rechneronline.de/pi/cylindrical-wedge.php

"Calculations at a cylindrical wedge. A cylindrical wedge is a cylinder, which is inclined cropped in a way that it is cut through the base. Otherwise it is a cut cylinder. Enter radius of the cylinder, height and angle and choose the number of decimal places. Then click Calculate."

Geometryx: Geometry - Calculator

https://play.google.com/store/apps/details?id=com.famobix.geometryx&hl=hr&gl=US

"Geometryx is an application that allows you to calculate quickly and easily the most important values and parameters of plane and solid figures and shapes.

The application calculates an area, perimeter, circumference, diagonal length, volume, coordinates of the geometric centroid, height, side lenght, angle (acute, right, obtuse, straight, reflex), radius (inner, outer), edges, arc length, line segments, base area, lateral surface area and total surface area of three-dimensional geometric shapes.

Geometryx is a simple calculator using trigonometric functions, Pythagorean theorem and Thales' theorem."

SkyCiv - Beam Calculator Online

SkyCiv - Free Online Beam Calculator for Cantilever or Simply Supported Beams

https://skyciv.com/free-beam-calculator/

• Calculate Reactions at Supports
• Bending Moment Diagrams
• Shear Force Diagrams
• Calculate the Deflection of Steel, Wood and Other Materials
• Premium: Design Checks, Hand Calcs, Stress, Libraries...

Matematika derivacija funkcije online - Derivative calculator

FreeMathHelp - Online Derivative Calculator
https://www.freemathhelp.com/derivative-calculator.php

Symbolab - First Derivative Calculator
https://www.symbolab.com/solver/derivative-calculator

Wolfram Alpha - Derivative

https://www.wolframalpha.com/input/?i=derivative+sin%5E2x%2B4x%5E5-tg%28x%5E5%29

Keisan Online Calculator

Keisan Online Calculator 
https://keisan.casio.com/

Life     Mathematics     Science     Practical     Other

Keisan Online Calculator provides High Accuracy results and useful calculators for daily life, learning, business and research.

 

KONIČNI ZATIK - TAPER PIN - DIN 1 - Taper and angle calculation

http://www.magafor.com/841/uk.htm#

Fill-in below, three of the parameters from your borehole, then the remain parameter will be automaticaly calculated.

Ispunite tri parametra konične rupe, preostali parametri će se automatski izračunati.

Najmanji zajednički višekratnik

Least Common Multiple, LCM Calculator:
https://www.calculatorsoup.com/calculators/math/lcm.php

WIDGET: LCM Calculator - Least Common Multiple

Najveća zajednička mjera (ili najveći zajednički djelitelj)

Greatest Common Factor GCF Calculator
Greatest Common Factor, GCF Calculator:

WIDGET: Greatest Common Factor GCF Calculator